Here is my 1201 Post "The Samurai Castle wall. The wall is 95% finished for the print phase. My unfortunate luck is that I ran short on Black Filament. Thanks to Socialist Governor here in Michigan we are on lock down. I just cant travel for non essential items. This coming Friday the 17th my black PAL should arrive. Right now I'm in the process of installing e magnets Now for the castle wall. The reason I used different colors of PLA is that I can use it now. Than paint as I go. More to follow.
Here break down
Center gate structure 52 hours,
The center gate roof 36.9 hours
The wall structure 105 hours
The flooring for the gate structure 43,2 hr
Lower wall 16.2 per section
Upper wall section 6.2 hrs
Corner tower structure 39.5 hrs
Corner wall 18.2 hours
Floors on top of the wall 7.5 hours per section.
Not counted the failed parts from power outage, Printer screw ups.
Now for the pictures.
|
The wall is about 4 feet long. |
|
Corner Tower |
|
Center Gate tower. The gates are not installed yet. May change the color |
|
The black pegs are for mounting the upper wall sections |
|
Center tower with roof removed. The floors are painted. Just need to be installed |
|
Corner tower roof removed. Flooring needs to be added |
|
Lower corner tower again the flooring needs to be added. |
No comments:
Post a Comment